Bounty Hunter Quick silver Bedienungshandbuch PDF herunterladen (Seite 5)

BATTERIES

IMPORTANT: Always use ALKALINE batteries for optimal performance.

Always remove the batteries for prolonged storage.

CHECK THE BATTERIES if your detector exhibits any of the following

symptoms:

●

1 The unit does not turn on.

●

2 Low speaker volume.

●

3 Unable to tune detector with the discriminate knob.

The Low Battery indicator light will come on and stay on whenever the

batteries need replacing. It should flash momentarily when the Power

Switch is turned on.

IMPORTANT: Your Quick Draw

II metal detector requires two 9-Volt

ALKALINE batteries.

DO NOT MIX OLD AND NEW BATTERIES

Follow these steps

to install the batteries.

●

1 Carefully remove the

battery compartment door

by pressing the release clip

on the right side of the door.

●

2 Snap one battery onto

each of the terminals and

place the batteries inside

the compartment. Insert

one battery with the

terminals facing down,

and the second battery

with terminals facing

outward.

●

Replace the compartment

door by carefully inserting

opposite side of clip first.

Then press down on clip side

until battery door snaps into

place.

Both batteries

facing inward

Release

Clip

1 2 3 4 5 6 7 8 9 10 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Bounty Hunter Quick silver Bedienungshandbuch Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messen, Testen & Steuern Bounty Hunter Quick silver