Bounty Hunter Time Ranger Bedienungshandbuch PDF herunterladen (Seite 9)

REQUIREMENT FOR MOTION

Like other modern metal detectors, the Time Ranger™ searchcoil

must be kept in motion in order to both detect and identify targets.

The All Metal Pinpoint mode continues to detect metal if searchcoil

motion stops over the target. This mode is used primarily to

pinpoint the exact location of a target so that it can be retrieved with

a minimum of digging, and does not provide target identification.

The Time Ranger™ also features a Self-Tuning All Metal mode in

Program #4. Under most conditions, this is the deepest and most

sensitive mode. It is used primarily for gold prospecting and for

relic hunting in areas where there isn't a lot of metal trash, and

does not provide target identification.

GROUND BALANCING

To achieve maximum depth in both the All Metals Pinpoint and Self-

Tuning all metals modes, the Time Ranger™ offers Smart Trac™

computerized ground balancing to cancel the effects of iron minerals

in the ground. This does not affect the other (discrimination/target

ID) modes. The All Metal Pinpoint mode can be used for pinpointing

objects at moderate depth in most soils without prior ground

balancing.

DISCRIMINATION

"Discrimination" refers to a metal detector's ability to ignore metal

objects in selected categories, especially iron and aluminum. This

makes searching an area where there's a lot of metal trash much

more pleasant. The Time Ranger™ offers a wide variety of

discrimination features which you can select according to conditions

and your personal preference.

DEPTH READING

The estimated "Depth reading" is based on the strength of the

signal. It is calibrated for typical coin-size objects. Small objects

will read deeper than they actually are, and large objects will read

shallower than they actually are.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 40 41

Keine Kommentare

Bounty Hunter Time Ranger Bedienungshandbuch Seite 9